Process Overview
This welding automation solution uses the Rainbow Robotics RB-5 and a NOUBELON DIGITAL MIG/MAG welder to weld cylindrical workpieces onto a plate, featuring fast teaching and high space efficiency. In manual welding, quality can vary significantly depending on operator skill, and the harsh working environment makes it difficult to secure experienced welders.
With this cell, even non-expert operators can simply load and unload parts, while the robot performs the critical welding process—enabling consistent weld quality and stable production output.
구성요소
| 로봇 | Rainbow Robotics RB5-850 Horizontal reach: 850 mm Repeatability: ±0.1 mm IP rating: IP66 |
|---|---|
| 주변기기 | Tooling Welding torch Torch mount Peripheral Equipment NOUBELON welder (DPS series) — Digital MIG/MAG, Synergic operation supported Wire feeder Gas supply unit Robot mounting base Workpiece fixing jig Job start/command switch box |
작업순서
| STEP 1. | Secure the workpiece in the welding jig |
|---|---|
| STEP 2. | Press the job start button |
| STEP 3. | The robot performs the welding operation |
※ 마로솔 내의 모든 콘텐츠를 무단으로 복사 및 재창작할 경우 부정경쟁방지법 및 저작권법에 위반될 수 있음을 밝힙니다.
추천 도입사례
Automation Solution Using an All Picker Gripper, Featuring Automated Part Assembly and Processing Lines
Process Overview This deployment is an automation solution for part assembly and processing lines using an All Picker Gripper. As the name suggests, the All Picker Gripper is designed to pick a wide range of objects, and it can perform stable picking even when the workpiece has holes or an irregular shape.
Machining Support for a WIA Turning Center Using Two DENSO Robots ⚙️🏭
Process Overview This automation solution uses two DENSO robots—VM60B1 (6-axis vertical articulated robot) and HS055 (SCARA robot)—to automate raw material loading, turning-center machining of plastic parts, and a downstream press-fit (crimping) operation. By integrating material loading, machining support, and press-fit handling into a single automated workflow, the system minimizes control points while improving overall productivity.
Automated nut loading into the machine tool—plus complete teaching support!
Process Overview Philliper had been handling the process of inserting nuts into the machine tool manually. Due to the repetitive nature of the work and insufficient precision, this led to reduced productivity and quality issues. To resolve this, they implemented an automation solution using four Hyundai robots and two Doosan robots. Project Background and Objectives Background Philliper was experiencing work inefficiency and inconsistent quality in the existing nut-loading operation due to a manual process. Key issues Speed loss and quality variation occurring during manual operations Increased operator fatigue and reduced productivity Operator burden caused by repetitive tasks in the nut insertion process Objectives Improve production efficiency by automating repetitive tasks through robot deployment Secure consistent quality and reduce defect rates through accurate insertion Improve the work environment by reducing operator fatigue and strengthening safety
Process Overview
This welding automation solution uses the Rainbow Robotics RB-5 and a NOUBELON DIGITAL MIG/MAG welder to weld cylindrical workpieces onto a plate, featuring fast teaching and high space efficiency. In manual welding, quality can vary significantly depending on operator skill, and the harsh working environment makes it difficult to secure experienced welders.
With this cell, even non-expert operators can simply load and unload parts, while the robot performs the critical welding process—enabling consistent weld quality and stable production output.
구성요소
| 로봇 | Rainbow Robotics RB5-850 Horizontal reach: 850 mm Repeatability: ±0.1 mm IP rating: IP66 |
|---|---|
| 주변기기 | Tooling Welding torch Torch mount Peripheral Equipment NOUBELON welder (DPS series) — Digital MIG/MAG, Synergic operation supported Wire feeder Gas supply unit Robot mounting base Workpiece fixing jig Job start/command switch box |
작업순서
| STEP 1. | Secure the workpiece in the welding jig |
|---|---|
| STEP 2. | Press the job start button |
| STEP 3. | The robot performs the welding operation |
※ 마로솔 내의 모든 콘텐츠를 무단으로 복사 및 재창작할 경우 부정경쟁방지법 및 저작권법에 위반될 수 있음을 밝힙니다.